This is an old revision of the document!

Camera controller

NOTE: this is a findings dump for now. It is unclear what is what, so there may be stuff pertaining to the h265 codec in here. Not sure how interwoven it is with the camera controller.

Known registers:

Address	Desc.
0xF0000800	??? (might not be strictly camera-related)

0xF0008414	???
0xF0008420	???
0xF0008468
0xF0008474	???
0xF0008478	??? IRQ enable flags??
0xF00084B0	???

0xF0008800	???
0xF0008810	??? control reg?
0xF0008814	???
0xF000881C+(N*8)	table N, bytes 0..3 (N=0..7)
0xF0008820+(N*8)	table N, byte 4
0xF000886C	???
0xF000887C+(N*8)	table N, bytes 0..3 (N=0..7)
0xF0008880+(N*8)	table N, byte 4
0xF00088B4	??? (related to framerate?) (actually part of the tables above)

0xF0008C00	???
0xF0008C04	??? weird value, timings?
0xF0008C08	Resolution?
0xF0008C10	???
0xF0008C28	???
0xF0008C2C	???
0xF0008C34	???
0xF0008C70	IRQ status/ack for IRQ 0x10

0xF0009000	??? control register?
0xF0009004	??? vertical resolution?
0xF0009008	???
0xF0009028	IRQ status/ack for IRQ 0x14
0xF0009030	??? (IRQ position?? think F0009508)
0xF0009034	??? (IRQ position??)
0xF0009038	IRQ status/ack for IRQ 0x1D
0xF0009040	extra IRQ status/ack for IRQ 0x14
0xF0009044	???

Related IRQs:

IRQ	Desc.
0x10	???
0x11	data ready?
0x14	???
0x1D	???