Differences

This shows you the differences between two versions of the page.

--- uic_eeprom_structure [2025/02/24 14:45] – arisotura
+++ uic_eeprom_structure [2025/04/18 09:54] (current) – arisotura
@@ Line 46: / Line 46: @@
 | 0x1203  | 1      | Region info 1 |
 | 0x1204  | 2      | CRC16 over 0x1203 |
+| 0x1206  | 1      | Board config 1 |
+| 0x1207  | 2      | CRC16 over 0x1206 |
 | 0x121A  | 2      | Volume calibration 1 |
 | 0x121C  | 2      | CRC16 over 0x121A..0x121B |
@@ Line 61: / Line 63: @@
 | 0x1283  | 1      | Region info 2 |
 | 0x1284  | 2      | CRC16 over 0x1283 |
+| 0x1286  | 1      | Board config 2 |
+| 0x1287  | 2      | CRC16 over 0x1286 |
 | 0x129A  | 2      | Volume calibration 2 |
 | 0x129C  | 2      | CRC16 over 0x129A..0x129B |
@@ Line 165: / Line 169: @@
   * 5 = Taiwan
   * 6 = Australia
+===== Board config =====
+Value is 0x15 for retail boards.
+If bit0-1 are any value other than 1, the gamepad will enter service mode upon boot.