Some weeks ago I felt that my good old SNES controller needs to be a bit more played on.

So last week I made a little Arduino/C# programm that let's you use your SNES gamepad with your PC!



As you can see it updates really fast so you don't have to worry about any slowdown

---

Connect the GND and 5V to the corresponding pins of your Ardiono and put Data, Latch and Clock on three different Digital pins.


Now you only have to change these lines in SnesPadIno.ino to the digital pins you use:

---

Just upload the script to your Arduino and install vJoy.

Then open vJoyConf.exe and set the Button amount of vJoy Device #1 to 8 and the POV amout to 1 and the mode to Continious.

Finally start SnesPad.exe and have fun using your SNES gamepad

---

Thanks to TacticalCode for the Aruino SNES library and vJoy for their awesome gamepad emulating driver.

Download: https://www.dropbox.com/sh/fj0f4yjju9m5rj9/AAAlg6dtvSapw2TtYIe7oPfTa?dl=0

____________________
GitHub - YouTube - NSMBHD